<<<Back to Product Page

Series 911 Male Flare Transition Submittal

Product Specifications

  • Fully pressure rated to pipe SDR installed (160PSI, 200PSI)
  • ASTM 1598 and ASTM 1599
  • Material complies with California AB1953, SB1334 and SB1935.
  • Requires a copper gasket.
  • Can be made with CTS pipe. Call for details.

High-Density Polyethylene: HDPE pipe

  • Meets ASTM D-3350 with minimum cell classification values of 345464C (PE 3408), PE445574C (PE 4710)
  • Meets ASTM F714. 
  • Density shall be no less than 0.955 g/cm as referenced in ASTM D1505
  • Melt index no greater than 0.15 g/10 minutes when tested per ASTM D 1238 
  • Tensile Strength at Yield –tensile shall be 3,200 psi to less than 3,500 psi as referenced in ASTM D638
  • ESCR-Environmental Stress Crack Resistance shall be over 5,000 hours with zero failures when tested per ASTM D 1693-Condition C
  • All pipe meets ASTM 3035. 
  • All certifications will be submitted upon request.