Polycam
About Us Contact Links Tech Specs Tests

Parts Description
New Products
Threaded Transitions
Grooved Transitions
Weld On Transitions
Steel Pulling Heads
MJ Adapter
Copper/HDPE Adapters
PVC/HDPE Adapters
Gas Transitions
Quick Transitions
ID Controlled Weld-Ons
Additional Transitions
Polypress Installation Tools
SocketFittings
Custom Fittings

Product Specs | Submittal Page | Print
Series 815
Weld-on Transition for
Gas and Water

Weldon (plain end) Transitions

The POLY-CAM Threaded Transition Adaptors is a multi-level mechanical transition fitting, protected under patent number 5,211,429, which is hydraulically compressed unto the polyethylene or pipe quality copolymer material.

Design
The relaxation creates a seal to prevent leakage. Under pressure, the internal pressure within the pipe increase the sealing surface area on the barb. Under zero internal pressure, the compression strain and tensional strain created by the compression of the multi-level barbs is greater then the stress created by relaxation and/or thero expansion and contraction. As the internal pressure increases the joining of the polyethylene or copolymer and the coupling increases. Sizes range from .75” to 30” Iron Pipe Size. And .75” -2” Copper tube size HDPE. They are rated for both water and gas use.

System Performance
The transition fitting is designed to handle the pressure rating of the HDPE pipe with a 2:1 safety factor at 73.40 degrees Fahrenheit with a minimum 50 year design life.

Quality Assurance
The transition fitting shall be manufactured by Poly-Cam, Inc. Poly-Cam, Inc. shall provide quality assurance with regards to proper installation, compatibility, performance, and acceptance. Transition joint meets or exceeds the requirements of ASTM D2513 Category 1.

Installation
HDPE pipe end: Install transition fitting so as to comply with the pipe manufacturer’s recommended procedures. All field welds shall be accomplished in accordance with Plastic Pipe Institute’s welding procedure for butt fusion.

Steel Fitting
: The entrance of the coupling is tapered at the beginning. The Polyethylene or copolymer material is cold pressed into the coupling. This allows the material to relax into the patented multi-level barb system.

Material
The POLY-CAM Threaded Transition is manufactured of Carbon Steel (A53 or A106 grade) Type 304 or Type 316 (ASTM A249 or ASTM A269) and or ERW pipe (ASTM SA-312) and incorporated with the transition manufactured of HDPE (cell class 345454c) or pipe quality Copolymer material.(pe3408, pe3608 and pe4710). All pipe meets ASTM 3035, ASTM 714 and ASTM D2513. All certification will be submitted upon request.

The epoxy coating (IF 194T Red Iron Oxide ) is fusion bonded to the metal. It has approvals NSF 61, FDA 175.300, AWWA C116-01,C213-01, UL 262 and FM 1120/1130 The carbon steel epoxy POLY-CAM threaded transition fittings complies with AWWA and NSF 61 material requirements. Stainless Steel insert – The insert are manufacture out 304 stainless steel tubing (ASTM A249 or ASTM A269) and or ERW pipe (ASTM SA-312).

Warranty
Warranty period is one year after date of substantial completion of installation.